Posted on

eARC Is a Link, Not a Guarantee: The TV Is Part of the Audio System

Abstract illustration of a television and soundbar in a dark home theater, created for this article.

The small label beside a TV’s HDMI port tells you what one link can carry. It says much less about what the TV, source and soundbar will actually send and decode.

English · 简体中文

Enhanced Audio Return Channel, or eARC, is useful because it sends audio from a TV’s built-in apps and connected sources back to a soundbar or AV receiver over the same HDMI cable that carries video to the screen. HDMI’s specification lists support for high-bitrate formats, including multichannel PCM, Dolby TrueHD, DTS-HD Master Audio and DTS:X. That describes the link’s capacity. It does not certify every TV to pass every format, every app to output it, or every receiver to decode it.

Signal path from a streaming app or player into a TV, then over ARC or eARC to a soundbar or AV receiver and speakers. The TV’s passthrough and each device’s format support are marked as separate checks.
One cable can carry the return signal, but the format still has to survive each device in the chain. Original Maroon diagram.

That distinction matters when a box promises Dolby Atmos. Atmos is the spatial-audio layer, not a single delivery format. Streaming services can deliver Atmos in a lossy Dolby Digital Plus stream; a UHD Blu-ray may carry it in lossless Dolby TrueHD. Apple says Apple TV 4K uses a high-bandwidth form of Atmos that does not work over ordinary ARC. The same Atmos badge can therefore describe streams with different bandwidth and routing requirements. “Atmos” alone does not tell you what a TV will pass to the sound system.

Nor is lossless transport a promise of a dramatic audible upgrade. It means a compatible path can preserve a lossless source format without reducing it to a lower-bandwidth one. The result still depends on the source track, decoding, speakers, room and settings.

Read the input, not just the logo

Even one soundbar can accept different formats through its HDMI input, eARC input and ARC input. Sony’s support table for the BRAVIA Theatre Bar 8 and Bar 9, for example, lists Dolby Atmos over Dolby Digital Plus for both ARC and eARC, while Dolby TrueHD Atmos and 7.1-channel LPCM are marked for direct HDMI input and eARC, not ARC. Its table also lists 360 Reality Audio for the bar’s HDMI input but not its TV return inputs. This is the manufacturer’s compatibility claim for those models, not a test of every TV connected to them.

The TV is another active part of the chain. Its own streaming app may output a different format from a disc player plugged into HDMI; a television may pass Dolby formats but not DTS, or treat different HDMI inputs differently. An eARC port cannot restore a format that the TV has already converted or dropped.

Independent testing shows how specific the gap can be. RTINGS reviewed Samsung’s The Frame Pro 2026, tested a 65-inch sample, and updated its test bench in October 2026. Its audio-passthrough results show eARC Dolby TrueHD 7.1 support but no DTS-format support; 7.1 LPCM required a setting override to work. That is a result for one tested model and setup, not a verdict on Samsung TVs as a whole. It does demonstrate why an eARC logo is not a substitute for the exact model’s format table. RTINGS describes its method as sending test files through a TV to a receiver and checking the format that arrives.

Choose the route around the weakest link

There are two common layouts. With sources connected to the TV, then the TV connected to the soundbar or receiver by eARC, one cable carries audio back and the TV can handle features such as high-refresh gaming video that an older receiver may not pass through. The trade-off is that the TV must support the audio passthrough you need.

With a player or console connected to an HDMI input on the receiver or soundbar, the audio reaches that device directly; it no longer depends on the TV passing that source’s soundtrack. But the audio system must then pass the video formats you want, such as HDR or high refresh rate. RTINGS’ 2024 latency study found lower measured audio-video synchronization error when sources went through soundbar HDMI-In rather than through the TV’s HDMI-ARC return path in its tested systems. The test used a Hisense U7H in Game Mode and specific PCM and Dolby Digital Plus Atmos signals. It does not show that eARC is always slower, or that direct routing will improve every setup; it is a reason to test both routes when gaming dialogue or effects visibly lag.

A quick check before buying another box

  1. Identify the actual soundtrack. Is it Atmos over Dolby Digital Plus, Atmos over TrueHD, DTS:X, or multichannel PCM? A service’s badge and a disc’s soundtrack are not interchangeable.
  2. Check the TV’s exact model and port. Read its audio-output table for both internal apps and HDMI inputs. Confirm which HDMI socket carries ARC/eARC and whether passthrough or eARC must be enabled.
  3. Check the soundbar or receiver’s input table. Look separately at HDMI-In, TV-eARC and TV-ARC columns; the same logo on the front does not mean each input accepts the same format.
  4. Test a known source. Enable the manufacturer’s recommended passthrough/bitstream setting, play a known track, then check the receiver’s display or app for the format and channel count. “eARC connected” confirms a link, not the soundtrack that arrived.
  5. Buy a cable last. A cable cannot add eARC or codec support to a port that lacks it. HDMI Licensing says its Ultra and Ultra High Speed cable categories are designed for eARC; older cable types with Ethernet may work but are not certified for that operation. If the cable also carries high-bandwidth video through an AVR, choose for that video requirement too.

If the only sources are TV apps and a soundbar supports Dolby Digital Plus Atmos over ARC, eARC may not change the format you receive. If you want the TV to pass lossless disc audio or multichannel LPCM, eARC is a useful requirement—but only alongside compatible source, TV passthrough and receiver support. It is a connection capability, not a universal sound-quality grade.

Sources and further reading

Manufacturer specifications above state intended compatibility; RTINGS’ product and latency results are independent tests of specific models and conditions. No Maroon Audio listening or bench test is claimed.